Tobacco Solutions

菸草業

Tobacco Can Label Inspection

Ensure the glue is present and correctly applied so labels can be secured properly

Tobacco Can Label Inspection

相關產品

2D Machine Vision Systems Insight 7000 and hand holding In-Sight 9000

In-Sight 視覺系統

精準又可靠地檢測、識別和引導元件

In-Sight 7000 系列

功能全面且性能卓越的視覺系統,體積小巧,並采用獨特的模組化設計。

Loose or pouched tobacco products are packaged in metal cans or plastics containers. The more expensive cans (or tins) are made with the branded artwork printed directly on the metal. The less expensive plastic containers, however, typically have paper labels glued to the lid. Clear glue dots are applied to the lid seconds prior to the label being placed in position. It is important for tobacco manufacturers to ensure the glue dots are present and applied in the correct location so the tobacco labels can be secured properly -- and not fall off later in the supply chain. While this may seem like a fairly simple application, it can be challenging to see the clear adhesive as it starts to dry.

Carefully positioned lights and a vision system with reliable geometry tools are key to solving this application. The IP67-rated In-Sight 7600 vision system with c-mount cover and external bar lights provide the necessary contrast to clearly see the presence and position of the glue drops on the tobacco can. The geometry (or measurement) tools locate the center of the lid and the relative position of the glue dots. Tobacco can lids with missing glue, or dots placed too close to the edge are discarded or redirected for manual rework. This application is easily set up and deployed with In-Sight Explorer software using the intuitive EasyBuilder interface. The inspections can be monitored and adjusted directly on the production floor with a display panel or web-enabled HMI on a laptop, tablet, or phone.

精選康耐產品

登入產品支援和訓練以及更多其他資源

加入MYCOGNEX

是否有任何疑问?

世界各地的康耐视代表可以随时为您提供支持,满足您的视觉和工业读码需求。

聯絡我們
Loading...