Electronics

Button Battery Cosmetic Inspection

Detect a wide range of weld and other cosmetic defects on batteries

Button Battery Cosmetic Inspection

相關產品

In-Sight D900

In-Sight D900

採用 In-Sight ViDi 深度學習視覺軟體

ViDi software with all defect detection tools

VisionPro Deep Learning

A breakthrough in complex inspection, part location, classification, and OCR

Button (or coin) batteries and cylindrical batteries are sealed by welding a cap onto a housing containing electrodes and electrolyte. A low-heat method such as laser or resistive welding is typical used to avoid damage to the battery contents but requires precision to ensure that the cap seal is secured. There is little margin for error. Defects can result in electrolyte leakage and decreased performance.

Welding defects can appear anywhere around the perimeter and can vary widely in appearance. Dents, scratches, and other defects can appear anywhere on the body of the battery. Both welding and cosmetic defects can be difficult to discern against the reflective surface of the cell battery. All of this makes it difficult for traditional machine vision to accurately detect the full range of defects found of a button battery.

And because these batteries are produced in high volume, and the defects are small and hard to spot, they present a similar challenge for manual inspection.

Get Pricing

To identify battery weld defects, Cognex Deep Learning’s defect detection tool is trained on a wide selection of properly sealed batteries to learn the full variation of normal parts, including the acceptable level of cosmetic defects. As it scans through battery caps it analyzes and flags any welds that are outside of the acceptable range, while minimizing false positives from purely cosmetic defects.

精選康耐產品

取得產品支援與訓練等等

加入 MyCognex

是否有任何疑问?

世界各地的康耐视代表可以随时为您提供支持,满足您的视觉和工业读码需求。

聯絡我們
Loading...