Electronics

Post-assembly Verification

Perform post-assembly verification to ensure that components are properly installed and meet quality parameters

Post-assembly verification using Cognex 3D laser scanners

Related Products

Лазерные 3D-датчики смещения серии DS1000

обеспечивают трехмерную проверку вашей продукции.

2D Machine Vision Systems Insight 7000 and hand holding In-Sight 9000

Системы машинного зрения In-Sight

не имеют равных по возможностям проверки, идентификации и направления деталей.

Most final steps of device assembly require highly accurate post-assembly verification measurements that include:

  • Glue/tape dispense volume and placement
  • Component-display clearance
  • Screw insertion depth
  • Display seating level
  • Display gap measurement
  • Assembled button height check

Common steps within these stages include display gap measurement, adhesive volume check, and housing quality inspection. These post-assembly verification steps often require combining data from multiple measuring devices, which can entail a time-consuming data calibration process that requires highly skilled technicians.

Get Pricing
Cognex 2D and 3D calibration technology cuts the time required for these final assembly stages from hours to minutes. A procedure that would typically take skilled operators hours to manually adjust can be accomplished in just minutes with little added skill-set. Every dimension of the module is captured with a higher resolution by bringing multiple sensors together during measurement, volume, and clearance checks.
Рекомендуемые когнекс продукты

ПОЛУЧИТЕ ДОСТУП К ПОДДЕРЖКЕ И ОБУЧЕНИЮ ДЛЯ ПРОДУКЦИИ И БОЛЕЕ

Присоединяйся к MYCOGNEX

У ВАС ЕСТЬ ВОПРОСЫ?

Представители Cognex доступны во всем мире, чтобы поддерживать ваше видение и потребности в чтении штрих-кода в промышленности.

Обратная связь
Loading...