Interactive Tutorials

Need a little more assistance? These tutorials and documents may assist you with your application needs.
Section 1: Hardware and Overview of EasyBuilder View (15 minutes)
- Introduction to the different models of the In-Sight 2000
- Overview of the available In-Sight 2000 accessories
- EasyBuilder view available within the In-Sight Explorer software
Section 2: Getting Connected and Setting up the Image (20 minutes)
- Overview of how to get connected to the sensor when it is listed in the network pane, as well as when it is not listed in the network pane.
- Accessing the generator key to add an emulator to the In-Sight Explorer
Section 3: Vision Tools and Logic (30 minutes)
- Detailed overview of the different vision tools, including:
- Location Tools and Inspection Tools
- Measurement Tools
- Counting Tools
- Math and Logic Tools
- Color Pixel Count Tool
- Logic Tool which allows the user to create a logical formula of tool pass and fail signals.
Section 4: Inputs/Outputs and Network Communication (20 minutes)
- Detailed overview of the Inputs and Outputs, which are on-off logic signals that come from or go to another device, such as a PLC.
- The communication step which configures the sensor for sending or receiving information for a network.
Section 5: Deployment (20 minutes)
- Detailed overview of the utilities that are useful when deploying a system, including:
- Backup
- Restore From
- Update Firmware
- Filmstrip
- Save Job, and
- Run Job
- The different access levels and how to assign the level to the user.