고객 사례

Wuxi Baotong uses In-Sight Micro 1020 vision system to inspect industrial blades

Wuxi Baotong using cognex insight 8000 red light metal inspection

관련 제품

2D Machine Vision Systems Insight 7000 and hand holding In-Sight 9000

In-Sight® 비전시스템

부품 검사, 식별 및 가이드 작업에서 최상의 성능을 제공합니다.

370 barcode reader held by hand

고정형 바코드 리더기

사용 편의성과 레이저 스캐너의 경제성을 갖춘 비전-기반 바코드 리더기

Wuxi Baotong, an industrial blade manufacturer in China, uses the In-Sight® Micro 1020 vision system to ensure that the printed sides of their blades are facing upwards in their production process. On one side of the blades that are inspected, the “SY” brand is stamped and the other side has nothing printed on it. The blades are 18mm (0.7086 in) long, 7mm (0.2756 in) wide, and are made of a silver-colored metal. In the inspection process, the blades are put into a bowl feeding machine and moved into three channels using vibrating motion. When a blade appears underneath the In-Sight® Micro 1020, it automatically takes a picture of it. If the vision system judges that the side containing printed words is facing upward, then it passes the product as a “good” part. When the vision system detects that the printed words are face down, it sends a switching signal to the actuating mechanism which facilitates the removal of this blade from the production line. Blades that enter the system upside down are moved back to the vibrating disk which causes them to bounce and flip over several times. The next time the blade enters the machine, it may be face up so that it can pass inspection and move through the production process.

The inspection process uses an In-Sight 1020 vision system, a vibrating disk, an annular light source, and equipment used to remove blades that enter the system upside down. The whole system can select and inspect 250 blades per minute.

Cognex 제품에 관한 자세한 정보:

Related Customer Stories

주요 Cognex 제품

제품 지원 및 교육 신청

MyCognex 가입

질문이 있으십니까?

전 세계 어디에서든 코그넥스 담당자들이 여러분의 비전과 산업용 바코드 판독 관련 문제를 지원합니다.

연락처