Training

In-Sight EasyBuilder and Spreadsheet Standard

In-Sight® EasyBuilder and Spreadsheet Standard class teaches the basics of how to configure a vision application using the EasyBuilder configuration interface and spreadsheets programming environment.

The In-Sight EasyBuilder and Spreadsheet Standard class gives new In-Sight users an overview of the hardware and software used by In-Sight vision systems. With the focus on getting the most from the In-Sight Explorer EasyBuilder and spreadsheet interface, users learn how to walk through the process of setting up a vision application using EasyBuilder and spreadsheet programming best practices.

 In-Sight - EasyBuilder and Spreadsheet Standard

At the end of this training event, participants will be able to:

  • Demonstrate how to connect the In-Sight camera to the network
  • Capture an image with the camera
  • Calibrate the image using real-world measurements
  • Utilize Locator Tools to find parts
  • Inspect parts using various tools such as Presence/Absence, Measurement, Counting, and ID
  • Utilize the Image Filter Tools in the job
  • Configure a Discrete Input and a Discrete Output line
  • Utilize the proper network communications for the job
  • Utilize various tools available to deploy the system, such as backing up and restoring cameras
  • Apply the fundamentals of lighting and optics to gain a good image of the part
  • Troubleshoot when the camera/network/tools are not working as expected
  • Navigate through a spreadsheet
  • Create basic mathematical formulas involving If & And functions
  • Implement fixturing in an In-Sight job
  • Implement the core vision tools, including pattern recognition, histogram, blob, and edge tools
  • Describe the purpose and methods of calibration
  • Describe different forms of communication: discrete I/O and network communications
  • Create a Custom View in a job
  • Explain the fundamentals of lighting and optics

Cognex’s Education Services has been recognized by the International Association for Continuing Education and Training (IACET) as an Accredited provider of CEUs.

Participants will earn 2.8 Continuing Education Units (CEUs) after successful completion of this training event provided they are an active participant throughout the training event, and are in attendance for 100% of the training event’s designated training hours.

IACET

必須条件:

  1. Familiarity with Microsoft® Windows® environment

コース詳細

開始日:
25-8月-2020 @ 08:30
終了日:
28-8月-2020 @ 15:00
日数:
4
開催場所:
Cognex, Guadalajara, Mexico
料金:
$1,495
空席状況:
10
言語:
スペイン語

クラス概要

  1. Hardware and Connections
  2. Software Overview and Image Acquisition
  3. Locator Tools
  4. Inspection Tools
  5. Identification and Image Filter Tools
  6. Digital I/O
  7. Network Communication
  8. Deployment
  9. Lighting and Optics
  10. Troubleshooting
  11. Final Project
  12. Hardware and Connections (optional)
  13. Software Overview and Image Acquisition
  14. Pattern Matching and Logic
  15. Histogram and Edges
  16. Blobs and Image Filters
  17. Calibration
  18. Digital I/O
  19. Communication
  20. GUI Building
  21. Maintenance and Deployment
    • TestRun
  22. Lighting and Optics (optional)

 

サポート、トレーニングなどにまとめてアクセス

MYCOGNEXに登録する

お気軽にお問合せください

Cognex は世界中でお客様のビジョンと工業用バーコドリーダのあらゆるニーズをサポートしています。

お問合わせ