• Contatto vendite Cognex: +39 02 3057 8196

  • Contatti

Cognex Blogs

Only Checker Delivers Detection and Inspection Capabilities

Checker is the only vision sensor that’s capable of both part detection and part inspection. A typical vision sensor requires an external signal to tell it when to take a picture of your part for inspection. Checker is different. It’s always looking for your part. It’s able to detect and track it as it passes by. Once it’s found your part, it’s capable of inspecting multiple features on your part and yielding a simple pass/fail or go/no result. Checker inspects features that are troublesome or simply cannot be inspected by a typical photoelectric sensor. These challenges include the presence of printed text, verifying correct part orientation or the correct location of a feature. Because Checker can detect the part, it can then track its position and guarantee that inspections are being performed in the same location each time. This effectively eliminates the need for costly fixturing in your inspection process.

OTTIENI L’ACCESSO AD ASSISTENZA E FORMAZIONE IN MERITO AI PRODOTTI E MOLTO ALTRO ANCORA

Entra a far parte di MyCognex

AVETE DELLE DOMANDE?

I rappresentanti Cognex sono disponibili in tutto il mondo per supportarvi nelle vostre necessità di lettura dei codici a barre industriali

CONTATTI
Loading...