Electronics

Electronics

Spot Weld Inspection

Accurately classify spot weld quality while minimizing false positives

Spot Weld Inspection

Related Products

In-Sight D900

In-Sight D900 Vision System

Powered by In-Sight ViDi Deep Learning-Based Vision Software

ViDi software with all defect detection tools

VisionPro Deep Learning

A breakthrough in complex inspection, part location, classification, and OCR

To ensure a firm electrical connection, wires must be spot welded to each other or to terminals. Welding involves melting together two different metals to form a firm connection. It is important that the weld be adequately melted, have a sufficient but not excessive volume, have a good shape, and be positioned properly. Manufacturers tend to have many lines for a wide variety of electronic parts and need to ensure that all connections are secure.

Because spot welds have a high variation and non-uniformity in appearance, including shape, position, color, reflectivity, texture, and surface markings, the inspections can have a high rate of false positives, otherwise known as overkills. Overkills lead to good parts being discarded. Good welds incorrectly marked as defective have to go to manual inspection, which is extremely slow compared to line speeds, and still often results in improperly identified weld defects.

Parts also vary in size, color, and other features from one lot to another. The wide range of variation, and the difficulty of distinguishing good connections from bad ones makes rule-based machine vision impractical.

Users train Cognex Deep Learning’s defect detection tool on a wide selection of properly spot-welded connections to learn the full variation of normal parts. As the tool scans through spot welds it analyzes and flags any that are outside of the acceptable range, while minimizing false positives.

Cognex Deep Learning’s classification tool can then train on a range of labelled welding defects and learn to categorize specific defect types, such as s poor shape, blowhole, crack, burn, or surface contamination. These categorized defects can then be used for upstream process control to minimize defects over time.

Featured Cognex Products

GET ACCESS TO SUPPORT & TRAINING FOR PRODUCTS & MORE

Join MyCognex

HAVE ANY QUESTIONS?

Cognex representatives are available worldwide to support your vision and industrial barcode reading needs.

Contact Us
Loading...