In-Sight Laser Profiler - Specifications

VC200 Vision Controller Specifications

Supported Cognex Devices	DS1050, DS1101, DS1300, DS925B, DS910B
Job/Program Memory	8GB non-volatile flash memory. Unlimited storage via remote network device
Image Processing Memory	2GB SDRAM
Cooling System	Fanless design
Inputs	8 optically isolated discrete inputs
Outputs	16 optically isolated discrete outputs
Camera Ports¹	2 RJ-45 dedicated Ethernet ports for connecting directly to support laser displacement sensor heads, additionally supplying Power over Ethernet⁵
LAN Port²	1 RJ-45 Ethernet port, 10/100/1000 BaseT with auto MDIX. IEEE 802.3 TCP/IP Protocol. Dedicated port for connecting to wide area network
USB Ports³	1 host USB 3.0 port (5 Gb/sec.) and 2 host USB 2.0 ports (480 Mb/sec.) ports for connecting a storage device. USB drives should be formatted with a FAT32 file system
SD Card Slot	1 SD card slot for saving images, run time files and results. SD cards should be USH-I or USH-II and formatted with a FAT32 file system
Video Out Port	1 locking HDMI port that provides connection to a display device
I/O Terminal Connectors	16–26 AWG, solid or stranded wire. Torque 0.25 Nm (2.2 in-lb)
24VDC Power Connector	14–18 AWG, solid or stranded wire. Torque 0.6 Nm (5.3 in-lb)
Data Logging	Profile and measurement logging to .csv file
Status LEDs	PWR LED, LED 1, LED 2
Housing	Aluminum, steel sheet metal, injection-molded housing
Mounting	Four bottom and four backside M4 x 0.7 threaded mounting holes. The vision controller may be optionally mounted using the accessory wall mounting bracket (BKT-WALL-VC200-01) or to a 35x15 mm DIN rail, using the accessory DIN rail mounting bracket (BKT-DIN-VC200-01)
Dimensions	178.8 mm (7.04 in) x 142.1 mm (5.59 in) x 75.1 mm (2.96 in)
Weight	1.45 kg (3.2 lb)
Current	3.5A (maximum)
Voltage	24VDC ±10%
Power Consumption	84W (maximum)
Operating Temperature⁴	0 °C to 45 °C (32 °F to 113 °F)
Storage Temperature	-30 °C to 80 °C (-22 °F to 176 °F)
Humidity	10%–85%, non-condensing (Operating and Storage)
Altitude	2,000 m (6565 ft)
Protection	IP30
Shock (Storage and Shipment)	30 G, per IEC 60068-2-7EA
Regulatory Compliance	CE, FCC, KCC, TÜV SÜD NRTL, RoHS

Notes:

To ensure reliable communication using 1000 BaseT operation, the Ethernet cable must not exceed 100 meters.
To ensure reliable communication using 1000 BaseT operation, the Ethernet cable must not exceed 100 meters.
Maximum USB port speeds are listed. Actual speeds are dependent on the USB device, which are typically lower.
To ensure sufficient ventilation, the vision controller must be mounted with 50 mm of clearance above the vision controller and 50 mm of clearance on both sides. If an adjacent device also produces heat, additional space or cooling is required if air space around the vision controller exceeds 45 °C (113 °F).
DS925B and DS910B heads only.

DS1000 Series Displacement Sensor Head Specifications

	DS1050	DS1101	DS1300
Dimensions	93.3 mm to 115.2 mm (H) x 50 mm (W) x 167.06 mm (L)
Weight	700 g
Operating Temperature	0ºC to 50ºC (32ºF to 122ºF)
Storage Temperature	-10ºC to 60ºC (-14ºF to 140ºF)
Maximum Humidity	85% (non-condensing)
Housing	IP65 (with Cognex recommended IP65 Ethernet and power I/O cables)
Shock	50 gs (11 ms half-Sine pulse)
Vibration	8 gs (10-500 Hz for 30 minutes)
Discrete I/O Operating Limits	Trigger input voltage limits: - 24 VDC – +24 VDC Input ON: > 10 VDC (>6mA) Input OFF: < 2 VDC (<1.5 mA)
Encoder Input Specifications	Differential: A+/B+: 5-24V (50 kHz max) A-/B-: Inverted (A+/B+) Single -ended: A+/B+: 5-24V (50kHz max) A-/B-: +0VDC=½(A+/B+)
Power Supply	Voltage: +24 VDC (22-26 VDC) Current: 500 mA max
Scan Rate	Up to 18KHz
Software	Cognex Designer software
Ethernet	Gigabit Ethernet interface Integrated link and traffic LEDs Standard M12-8 connector
Certifications
Accessories	Ethernet cable: 5m, IP65-rated Power: + I/O + Encoder cable, IP65-rated Mounting bracket Stainless steel enclosure, IP69K-rated for the food industry
VC5 Controller	Intel i5 processor, Precision I/O Real Time Communication, 207 mm (H) 132.6 mm (W) x 229.5 (L)

DS1000 Series Displacement Sensor Head Model Comparison

Specifications	DS1050	DS1101	DS1300
Near Field of View (mm)	43	64	90
Far Field of View (mm)	79	162	410
Clearance Distance (mm)	87	135	180
Measurement Range (mm)	76	220	725
Laser Class	2M	2M	2M
Resolution X (mm)	0.042–0.077	0.063–0.158	0.088–0.410
Resolution Z (mm)	0.004-0.014	0.010-0.052	0.016-0.265
Linearity	0.06% FS	0.08% FS	0.23% FS

DS900 Series Displacement Sensor Head Specifications

	DS910B	DS925B
Dimensions	96 mm (H) x 33 mm (W) x 85 mm (L)
Weight	380 g
Operating Temperature	0ºC to 45ºC (32ºF to 113ºF)
Storage Temperature	-20ºC to 70ºC (-4ºF to 158ºF)
Maximum Humidity	5-95% (non-condensing)
Housing	IP65 (with Cognex recommended IP65 Ethernet and power I/O cables)
Laser Power	8mW (class 2M) 405nm wavelength
Encoder Input Specifications	Single-ended quadrature encoder. A+/B+ voltage limits: +5 VDC (TTL); +30 VDC (HTL) Input ON: > 2.4 VDC (TTL); > 11 VDC (HTL) Input OFF: < 0.8 VDC (TTL); < 3 VDC (HTL) A-/B-: +0VDC
Power Supply	Voltage: +24 VDC (11-30 VDC) Current: 500 mA max IEEE 802.3af Power over Ethernet
Scan Rate	1.39 kHz
Software	In-Sight VC Explorer with EasyBuilder
Ethernet	Gigabit Ethernet interface Standard M12-8 female connector
Certifications
Accessories	Ethernet cable: 5m, IP65-rated Power: + I/O + Encoder cable, IP65-rated
VC5 Controller	Intel i5 processor Precision I/O Real Time Communication 207 mm (H) 132.6 mm (W) x 229.5 (L)