In-Sight Laser Profiler

In-Sight Laser Profiler Specifications

VC200 Vision Controller Specifications

Job/Program Memory 8GB non-volatile flash memory. Unlimited storage via remote network device
Image Processing Memory 2GB SDRAM
Cooling System Fanless design
Inputs 8 optically isolated discrete inputs
Outputs 16 optically isolated discrete outputs
Camera Ports1 2 RJ-45 dedicated Ethernet ports for connecting directly to support laser displacement sensor heads, additionally supplying Power over Ethernet
LAN Port2 1 RJ-45 Ethernet port, 10/100/1000 BaseT with auto MDIX. IEEE 802.3 TCP/IP Protocol. Dedicated port for connecting to wide area network
USB Ports3 1 host USB 3.0 port (5 Gb/sec.) and 2 host USB 2.0 ports (480 Mb/sec.) ports for connecting a storage device. USB drives should be formatted with a FAT32 file system
SD Card Slot 1 SD card slot for saving images, run time files and results. SD cards should be USH-I or USH-II and formatted with a FAT32 file system
Video Out Port 1 locking HDMI port that provides connection to a display device
I/O Terminal Connectors 16–26 AWG, solid or stranded wire. Torque 0.25 Nm (2.2 in-lb)
24VDC Power Connector 14–18 AWG, solid or stranded wire. Torque 0.6 Nm (5.3 in-lb)
Data Logging Profile and measurement logging to .csv file
Status LEDs PWR LED, LED 1, LED 2
Housing Aluminum, steel sheet metal, injection-molded housing
Mounting Four bottom and four backside M4 x 0.7 threaded mounting holes. The vision controller may be optionally mounted using the accessory wall mounting bracket (BKT-WALL-VC200-01) or to a 35x15 mm DIN rail, using the accessory DIN rail mounting bracket (BKT-DIN-VC200-01)
Dimensions 178.8 mm (7.04 in) x 142.1 mm (5.59 in) x 75.1 mm (2.96 in)
Weight 1.45 kg (3.2 lb)
Current 3.5A (maximum)
Voltage 24VDC ±10%
Power Consumption 84W (maximum)
Operating Temperature4 0 °C to 45 °C (32 °F to 113 °F)
Storage Temperature -30 °C to 80 °C (-22 °F to 176 °F)
Humidity 10%–85%, non-condensing (Operating and Storage)
Altitude 2,000 m (6565 ft)
Protection IP30
Shock (Storage and Shipment) 30 G, per IEC 60068-2-7EA
Regulatory Compliance CE, FCC, KCC, TÜV SÜD NRTL, RoHS


  1. To ensure reliable communication using 1000 BaseT operation, the Ethernet cable must not exceed 100 meters.
  2. To ensure reliable communication using 1000 BaseT operation, the Ethernet cable must not exceed 100 meters.
  3. Maximum USB port speeds are listed. Actual speeds are dependent on the USB device, which are typically lower.
  4. To ensure sufficient ventilation, the vision controller must be mounted with 50 mm of clearance above the vision controller and 50 mm of clearance on both sides. If an adjacent device also produces heat, additional space or cooling is required if air space around the vision controller exceeds 45 °C (113 °F).


Join MyCognex


Cognex representatives are available worldwide to support your vision and industrial barcode reading needs.

Contact Us