SPECIFICATIONS | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
IS3D-L4050 | IS3D-L4100 | IS3D-L4300 | |||||||||
1K | 2K | 1K | 2K | 1K | 2K | ||||||
Measurement range | Clearance distance | 92.00 mm | 130.00 mm | 180.00 mm | |||||||
Z-axis (height) | Measurement range | 106.00 mm | 235.00 mm | 745.00 mm | |||||||
X-axis (width) | Near field of view | 55.00 mm | 75.00 mm | 95.00 mm | |||||||
Middle field of view | 72.50 mm | 127.50 mm | 277.50 mm | ||||||||
Far field of view | 90.00 mm | 180.00 mm | 460.00 mm | ||||||||
Laser (light source) | Wavelength | 450 nm | |||||||||
Laser class | 2M | ||||||||||
Output power | 45 mW | ||||||||||
Spot size (middle field of view) | 110 μm | 181 μm | 240 μm | ||||||||
Sensor | Data points/profile | 960 points1 | 1920 points | 960 points1 | 1920 points | 960 points1 | 1920 points | ||||
X resolution | Top | 57.3 µm | 28.6 µm | 78.1 µm | 39.1 µm | 99.0 µm | 49.5 µm | ||||
Bottom | 93.8 µm | 46.9 µm | 187.5 µm | 93.8 µm | 479.2 µm | 239.6 µm | |||||
Z resolution | Top | 2.5 μm | 4.4 μm | 6.9 μm | |||||||
Bottom | 6.9 μm | 25.9 μm | 147.5 μm | ||||||||
Z repeatability2 | Top | 0.5 μm | 1 μm | 2 μm | |||||||
Bottom | 0.5 μm | 1 μm | 2 μm | ||||||||
Z linearity3 | 0.06% of full scale (F.S.) | 0.04% of full scale (F.S.) | 0.05% of full scale (F.S.) | ||||||||
Temperature characteristics | 0.01% of F.S./°C | ||||||||||
Environmental resistance | Housing protection4 | IP65 | |||||||||
Operation temperature5 | 0–45 °C (32–113 °F) | ||||||||||
Storage temperature | -20–70 °C (-4–158 °F) | ||||||||||
Maximum humidity | <80% (no condensation) | ||||||||||
Vibration | 10 to 57, double amplitude 1.5 mm X,Y,Z, 3 hours in each direction | ||||||||||
Shock | 15/6 msec | ||||||||||
Scan Rate |
Up to 4 kHz (after windowing down the sensor) (6Up to 6 kHz) |
||||||||||
Housing material | Aluminum | ||||||||||
Weight | 0.94 kg | ||||||||||
Dimensions | 150.5 mm x 101 mm x 45 mm | ||||||||||
Power supply requirements | 24 VDC +/- 10%, 750 mA minimum | ||||||||||
Inputs | Trigger, differential/single ended encoder, laser interlock | ||||||||||
Trigger |
Input voltage limits: Trig+ - Trig - = -24 VDC to +24 VDC Input ON: >10 VDC (>6 mA) Input OFF: <2 VDC (<1.5 mA) |
||||||||||
Encoder specifications |
Differential: A+/B+: 5–24V (1.0 MHz max) A-/B-: Inverted (A+/B+) Single ended: A+/B+: 12–24V (1.0 MHz max) A-/B-: VDC = ½ (A+/B+) |
||||||||||
Interface |
Gigabit Ethernet interface Integrated link and traffic LEDs Standard M12-8 X-coded female connector |
1 Only available when binning is enabled in the camera settings.
2 Z repeatability is measured an average of 100 times over a pointcloud using a 4x4 mm area, at the middle of the measurement range.
3 Z linearity is the maximum deviation of 250 position measurements on the measurement range, where a measurement is the average of 2 profiles using the standard Cognex target.
4 Mounted to a 400 mm aluminum bar on top of the camera.
5 From the standard ambient temperature 21° C (70 °F).
6 When binning is enabled and the FOV is windowed down.