Drache Umwelttechnik GmbH

    Diez, Germany
      Customer Objectives:
      • Verify position of ceramic filters during kiln stress test
      • Prevent misalignment of filters to avoid blockages capable of causing a week’s worth of downtime and costly rework
      • Ensure ceramic filters meet strict quality requirements
      Key Results:
      • Automated continuous monitoring of filters between the entry and exit points of the kiln
      • Deployed an effective early warning network, which detects the first signs of a kiln blockage (drop in brightness levels) and alerts line workers who quickly rectify the problem
      • Minimized costs incurred by production downtime
      Cognex Solution:

      It is hot. Very hot. It must be tough being a delicate ceramic filter travelling slowly through a roller kiln at 2372°F/1300°C. The roller kiln, operated by Drache Umwelttechnik GmbH, is just one of many elements of stress that these intricate products will be subjected to further down the line. The end-product will be used to filter contaminants from molten aluminium and iron used in casting—a difficult job for such lightweight parts.

      The ceramic filters must meet very stringent quality requirements before they can be put to use. Yet, even filter manufacturers are not exempt from blockages—one occurs in the Drache roller kiln on an average of once each year. When a filter strays from its normal path through the kiln, it will cause a blockage, and everything stops working. The filter blockage also stops the heat from escaping the kiln, which is when the more serious problems occur. The resulting temperatures destroy the heat insulation of the kiln, causing a week's worth of production downtime along with the replacement of the kiln’s insulation—both costly consequences.

      Keeping an eye on the fire

      The problem was reason enough for the medium-sized, family-operated company from Dietz in Rhineland-Palatinate, Germany, to take a closer look at this quality control issue. The solution included the installation of a new camera monitoring system in cooperation with Hesselmann & Köhler Prozessautomation. Based in Limburg an der Lahn, Germany, Hesselmann & Köhler Prozessautomation specializes in planning, manufacturing, and setting up systems in the fields of electrical, automation, and process engineering. Four Cognex In-Sight 8000 cameras systems form the centerpiece of an effective early warning network, which detects the first signs of a kiln blockage.

      Normally, the ceramic filters should move straight ahead toward the roller kiln exit. However, if the filters move to the side or toward the top of the kiln, problems start to occur. After a thorough analysis, the four In-Sight 8000 cameras were put into position to monitor the interior of the kiln between the entry and exit points. When the filters move offline, they shield the light produced by the gas burner. This is the first sign of filter misalignment, which may result in a blockage.  In such cases, the Cognex vision systems, equipped with an infrared filter, can detect the drop in brightness levels and automatically trigger an acoustic warning signal via a BUS connection. This alarms the workers, who can see that a blockage is starting to form and quickly rectify the problem before it gets out of control.

      Automatic checking

      The company has also implemented additional preventive measures to detect blockages at the earliest stage possible. An industrial PC is connected to the cameras displaying the four images of the kiln, as provided by the In-Sight cameras. The operator can now observe what is happening inside the roller kiln at all times. To ensure maximum quality control, an acoustic signal also sounds every 30 minutes, prompting the operator to look at the screen. Once the operator has acknowledged the check, the alarm stops, and the check is logged. This process provides Drache Umwelttechnik with a comprehensive system ensuring maximum reliability. The combination of an independent BUS check and a networked industrial PC provides continuous monitoring of the firing processes inside the roller kiln, thereby preventing the intricate ceramic filters from causing harm to the line.

      Proud developers

      Thomas Köhler, CEO, and Christian Schmitt, application developer, of Hesselmann & Köhler Prozessautomation developed and implemented a blockage detection system which has provided Drache Umwelttechnik with a decisive improvement in production reliability. By minimizing the costs incurred by production downtime, the system makes a sustainable contribution in strengthening the market position of this ceramic filter specialist.

      Empfohlene Cognex-Produkte


      Werden Sie Teil von MyCognex