• Cognex Vertrieb: +49-721-958-8052

  • Kontakt

Cognex Blogs

Vision Sensor Measurement Tools in Action

One of the principal differentiators that Checker vision sensors have over photoelectric sensors and even other vision sensors is their ability to determine dimensions of parts and deliver simple pass/fail results. This is really important in the inspection example I give here, verifying component thickness after the machining of an automotive part component.

In this example an automotive part component comes down a belt, is machined on the production line, and moves to the inspection station. The part can be in any position on the belt because Checker is always looking for the part so there is no need for the part to be fixtured precisely. This means that you don’t have to adjust the sensor constantly (like you do with photoelectric sensors). Once the part is found, the width, height and diameter measurement tools quickly measure the part and produce a pass/fail result.

Correct thickness
Incorrect thickness
vision_sensor_measurement_tools

In this example, Checker is performing part inspections that human eyes and photoelectric sensors simply cannot. The result for the user is 100% defect detection, more quality control, and lower production costs.

More Posts on

Ihr persönlicher Zugang zu Support & Training für Produkte & Mehr

BENUTZERKONTO ANLEGEN

SIE HABEN EINE FRAGE?

Cognex is weltweit vertreten, um Sie bei Ihren Vision- und Barcode-Anwendungen zu unterstützen.

Kontakt
Loading...