• Call Cognex Sales: 855-4-COGNEX (855-426-4639)
  • Contact us

PCB Components Inspection

3D Displacement Sensors inspect the proper number, size, and placement of components on printed circuit boards

/uploadedImages/2014_Taxonomy/Industries/DS_Applications/_PCB-Components.jpg

Challenge:

Ensure that each PCB has all the components it needs properly positioned before being installed into other devices.

Solution:

A DS1000 was able to see if each component was present and ensure that each component was seated correctly. Using the height and angle tool, the DS1000 was able to identify any defective areas on the board before the PCB was installed.

Results:

The DS1000 ensured that every PCB was manufactured inspected and built without errors. Costs were reduced when the DS1000 identified improperly seated components before they were soldered onto the PCB. This allowed the manufacturer to increase quality and decrease costs at the same time.

Get pricing information from a Cognex Sales Engineer